Do you need any help?

Please click the button below to contact us

Contact Us

Steel Ballasted Bracket Series

🏗️ Flat Concrete Roofs: Zero drilling required; protects waterproofing integrity completely. 🏜️ Open Ground Terrains: No heavy civil earthworks; relies on flexible ballast weights. 🌊 Wind-Prone Areas:Aerodynamic matrix design; resists high wind uplift forces safely. 📐 Irregular Layouts:Modular interconnected grid; easily fits complex roof obstacles.

  • Commodity name: Steel Ballasted Bracket Series

Product Details


CARBON STEEL BALLASTED SOLAR MOUNTING SYSTEM

FLAT ROOF PV MOUNTING SOLUTION

SECURE YOUR SOLAR ARRAY. WITHOUT PENETRATION.

Designed for flat and low-slope rooftop photovoltaic installations, this carbon steel mounting system uses engineered ballast weight to secure the PV structure without penetrating the roof waterproofing layer in its non-penetrating configuration.

The Carbon Steel Ballasted Mounting System is engineered for flat concrete roofs and open ground installations where roof waterproofing integrity is critical. By utilizing concrete blocks or pavers as ballasts, this system eliminates the need for roof penetration, protecting the building structure from potential water leakage while offering robust wind resistance.

Suitable for commercial, industrial and other compatible flat-roof solar projects.

A PRACTICAL SOLUTION FOR FLAT ROOF SOLAR INSTALLATIONS.

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

 

HOW DOES THE BALLASTED SYSTEM WORK?

The system uses concrete ballast blocks to provide the weight required to resist movement and wind uplift.

The carbon steel support frame carries the solar modules, while the base structure distributes the loads to the ballast components and roof surface.

In a non-penetrating installation, the mounting assembly does not require drilling through the roof waterproofing membrane.

KEY DESIGN CONSIDERATIONS

Ballast weight is calculated according to site-specific wind conditions and structural design.

Roof load capacity must be checked before installation.

Suitable protective layers should be provided between the mounting base and roof surface.

Tilt angle and array layout influence the wind loading and required ballast configuration.

 

 

 

DESIGNED FOR FLAT ROOF PV PROJECTS

COMMERCIAL BUILDINGS

Solar installations on suitable flat-roof commercial properties.

INDUSTRIAL FACILITIES

Rooftop PV projects for factories, workshops and warehouses.

LOGISTICS & STORAGE BUILDINGS

Large rooftop areas where modular solar array layouts can be arranged.

PUBLIC & INSTITUTIONAL BUILDINGS

Compatible flat-roof projects requiring a non-penetrating mounting configuration.

Application suitability depends on roof construction, structural capacity, waterproofing system, wind conditions and project engineering requirements.

SYSTEM COMPONENTS

 

The ballasted mounting assembly consists of structural supports, ballast components and PV module fixing accessories.

 

A — CARBON STEEL SUPPORT FRAME

The primary supporting members carry the module rails and transfer structural loads to the base assembly.

B — BASE RAIL / SUPPORT CHANNEL

Connects the supporting units and provides the required structural support and load distribution.

C — BALLAST BLOCK / BALLAST TRAY

Accommodates the calculated ballast weight used to secure the mounting assembly.

D — DIAGONAL BRACE & CONNECTORS

Connects and reinforces the support structure according to the engineering design.

E — MODULE RAILS & CLAMPS

Provides the mounting interface for PV modules, including rail sections, mid clamps and end clamps where applicable.

F — FASTENERS & ROOF PROTECTION

Includes the specified bolts, nuts, washers and protective interface materials.

━━━━━━━━━━━━━━━━━━━━━━━━

COMPONENT CONFIGURATION

Standard or customized support dimensions

Different ballast arrangements

Compatible PV rail and clamp options

Project-based connection details

 

CONFIGURED FOR YOUR ROOFTOP PROJECT

We provide standard and customized carbon steel ballasted mounting configurations according to project requirements.

CUSTOMIZATION OPTIONS

Support dimensions and structural profiles

Tilt angle and panel layout

Rail and connection details

Ballast block specifications and arrangement

Surface treatment and fastening components

PROJECT SUPPORT

Product drawings and layout coordination

Bill of Materials (BOM)

Mounting component configuration

Project-based quotations

Send us your roof layout, module specifications and installation requirements for technical review.

Structural Components

Product Overview

 

The carbon steel ballast mounting system is suitable for flat concrete roofs or open flat ground. The installation process is very simple: just set up high, medum and low ballast components according to the layout, place the ballast concrete blocks, and then fix the modules to the ballastcomponents using the module end clamps. Since the ballst components are independent of each other, the module layout can be freely adjusted, offering high flexibility.

 

No rails are required in the structure, which can significantly save material and installation costs. In addition,only light concrete blocks are used during installation, which will not damage the existing roof or ground structure.

 

Technical Specifications

ItemParameter
Installation locationFlat roof or open ground
Installation typeConcrete block ballast
Tilt angle10° or customized
Module typeFramed or frameless
Panel orientationLandscape
Max wind speedUp to 42m/s
Max snow loadUp to 1kN/m²
Main materialQ235 carbon steel
Surface treatmentHot-dip galvanizing
Fastener material304 stainless steel
Bracket colorSilver
Design standardAsce7, eurocode, jis8955, gb50009
Warranty12 years
Service life25+ years

Keyword: Steel Ballasted Bracket Series

Inquiry message

We will contact you as soon as possible. Please pay attention to your email and phone number